PureVolume

 
Next »
 
 

CNC Get a handle on

blog post
The language messer mg that these machines use is called G-code. G-code has been around since...

Since we are working with CNC machines that do benefit us, we have to get a grip on those CNC machines somehow. We need to control them for safety reasons as well. If you provide a device poor instructions it can cause harm to you or the part and easily get free from get a handle on you are machining. We want to give appropriate commands to your machines, at appropriate times so they really aren't "out of control."

The language that these products use is called G-code. G-code 's been around since the early 60's. There are numerous variations of G-code, but most are very similar to each other. Begin to see the previous section for an example of G-Code.

We will have to make use of a computer to talk to our CNC equipment. Signals will be sent by our computer to the CNC equipment. In-between our computer and our CNC equipment sits an operator. Commands are converted by a controller in to signals which can be used to regulate the activity of our unit.

As these signals are sent of the CNC control, each goes to either stepper or servo motors. This is the way we produce motion. On our CNC machine these engines push our numerous axis. While we are going our axis, there is generally a cutting instrument of some kind removing material. This is actually the machining process in conjunction with messer mg CNC.

This is a short description of the 2 kinds of engines generally used in CNC:

Stepper motors:

Easy style

Easy to use

Create torque at low rpm

Don't know their position with regards to the program

Servo Motors:

Produce torque at high RPMs

Usually need gearing of some kind to work

More advanced

Can preserve their relative position, ergo, they could be much more appropriate

CNC Unit Controllers

Controllers usually stand alone close to the CNC machine. a translator between your control computer and your CNC equipment they act. Broadly speaking, they put quite a bit of price to a machine as well. Controllers may cost anywhere from $1000-$20,000 or more depending on their sophistication. save on
 

Posted Apr 23, 2013 at 11:41am

0 likes

 

Comments

 
 
1