PureVolume

 
 
 
Blog Post
 
If you are thinking about becoming a plumber yourself, then you should first try to start out as an apprentice. If you can find a good mentor then you will learn a great deal more from watching and assisting him than you possibly could learn by working on projects alone.

It is very important to to use lots of cold water when running your garbage disposal. Cold water helps the blades stay sharp and keeps the disposal running smoothly. Using hot water will cause grease to liquefy and accumulate in the drain, which will cause clogs in your pipes.

plumbers in portland

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

Avoid flushing cotton balls, cotton swabs and any feminine sanitary products down the toilet. Even small panty liners can cause big problems because their adhesive backing can stick to pipes and cause stoppages. Keep a small, covered wastebasket next to the toilet to encourage guests to properly dispose of used sanitary articles.

Never pour grease down the kitchen-sink drain. This will help you avoid clogs in your kitchen sink. Place grease in a can or other receptacles and dispose of in the trash. Grease that has congealed on pots, and pans can be wiped off with paper towels that can be thrown in the trash.





Before embarking on a Plumbing project, make sure that you're aware of where the shutoff valve for water in your home is, as well as the valves for shutting off individual structures like sinks, toilets, etc. This way, if something goes wrong, you'll be able to stop the water flow.

Best Plumbing

Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.

http://www.elocalplumbers.com/

To clear mineral deposits from your showerhead, try a soak in white vinegar. Simply add a cup or two of vinegar to a plastic bag and tape it around the showerhead, ensuring that it is submerged. Leave the bag on for an hour, and the vinegar will dissolve the mineral build-up, allowing water to gush through like it was when it was new.

home inspection, water conservation

Posted Feb 03, 2016 at 10:22am

Comments

 
 

Posts (24)

 
Signup for PureVolume, or Login.