painting and decorating dublin
To make a feeling of luxurious silk or designer picture "faux dragging" can be applied on the majority of adequately smooth and readied surfaces. Whilst it is a fairly easy strategy to actually learn celebrate enormous benefits to the overall painting and designing project as the coatings are both luxurious and stunning.
A huge number of different glazes and latex paints can be used to create the "faux dragging" effect but we'd always suggest utilizing an oil based paint or glaze as it will give your more slack in terms of trying to adjust it into the necessary styles as non-oil primarily based ones can dried out extremely quickly. This specific best thing about this technique is certainly not only does it work on walls and ceilings but it could be applied to most forms of woodwork and furnishings. house painting dublin
The effect is created whenever a dry brush is actually pulled through a coloured glaze. In doing so the base color is revealed in very fine lines, which make the wall's look like silk fabric. Dragging is most effective in soft colours such as pastels, over a white base coat. You can also use a cream or even off-white base with brown or taupe hues to create a "vintage" look.
Here are the steps you'll want to take to perform "faux dragging":
Use the two coats of an latex base coat (whitened or off-white). After piece of art both coats, allow wall dry for about two hours.
Mix satin latex paint with latex double glazed liquid according to the instructions n the bundle of the glazing liquid.
Apply the coloured glaze with a workable length of floor.
Start at one end and pull a 4" hauling brush (or any kind of long bristled brush) through the wet glaze. You can also execute this technique using a dried up rag. Repeat more than once to get the desired impact. Keep your hand while steady as you can because you drag.
Also be aware that if you are actually working with the full height of the wall from ceiling to base board, you can use a very vast brush, such as a wallpaper brush or even the wide end of a brush.
Repeat steps 3 & 4 on the next area. Clean the actual dragging brush on a rag before dragging the next area.
In the event that applying the dragging end to woodwork or perhaps trim, apply a coat of varnish, after the conclude is dry.