PureVolume

 
Next »
 
 

Tips For Water Heater Installation

blog post

Conventional Water Heaters

plumbing austin

Water heaters have a long lifespan nonetheless they need to be replaced eventually. In terms of water heater installation is involved, it is not a complex process on an experienced handyman and can be easily completed in a brief time period of time. However, it is very important ensure that all the connections are made correctly and there are no errors.

An additional thing you need to keep in mind if you are thinking of installing a brand new water heater on your own is that you might want the right tools to ensure that all the connections are made in the best manner. You won't get past an acceptable limit without the right tools.

The first thing you need to do is to detach the existing water heater. Before you start detaching, you need to shut off all the connections for example water collection, gas connection or electrical connection with respect to the type of heater you've got in your place. Keep in mind that water heaters are heavy and you should be prepared to handle the body weight to prevent it from falling down and cause injury.

Now, you should connect the hose towards the drain valve in the old heater. This drain valve is situated near the bottom of the water heater. The hose must be placed outside. Isn't it about time to unscrew the Inlet in addition to outlet fittings. These are generally on the top of the heater as well as a pipe wrench will be needed for this. You will also have to unscrew the gas line fitting.

water heater service austin

In the end the connections are already disconnected, you can safely eliminate the old heater. You will need to dispose of the old heater as reported by the regulations and rules with your location. You can now safely place the new water heater instead of the old one and level it.

You need to ensure that various controls in the heater are accessible able you are going to use it. Once heater is at place, you can connect the outlet as well as inlet pipe. Once more, you will need a pipe wrench to screw the inlet and outlet pipes. Congratulations, you should open the river line and let the tank fill completely.

When the tank has been filled, you need to connect the gas line by using the pipe wrench or you have chosen an electric heater, it's switch on the mains. This is all there is to installing of water heater.

However, you must engage in this activity only if you are sure about handling all this. If you have any doubts or you are not good together with the tools, you should hire the services of an expert technician to complete the water heater installation at reasonable prices.

 

Posted Jan 11, 2016 at 7:18am

0 likes

 

Comments

 
 
1