Next »

Carbon Fiber Plate,Carbon Fiber Tube,Carbon Fiber Products etc. Peofessional Manufacturers Suppliers, Exporters

blog post

2mm CNC Cutting Twill Matte 3K Pure Carbon Fiber Sheet

Acen International

Acen International is a manufacturer and distributor of high quality, high strength, lightweight carbon fibre sheet, carbon fiber tube and customized parts, founded next year and is located in Shenzhen, China.

Graphite is a new variety of super strong material that is certainly also lightweight. It's five times as strong as steel as well as times as stiff, yet a couple of seconds weighs about two-thirds less. Graphite is just thin strands of carbon, even thinner than real hair. These strands may be braided or twisted together the same as yarn.

The method for manufacturing carbon fibers is an element chemical and part mechanical. The fabric is strained into long strands of fiber and heated into a very high temperature without and can come in contact with oxygen. The fiber cannot burn without oxygen. The information then goes through a procedure called carbonization. The endeavors to mass produce Carbon Fiber have failed so far due to scarce demand and deficiency of skilled workers. Also it is expensive.


During processing, certain bits of carbon fibers can back out of. They circulate via a flight in the form of fine dust and they are health hazards when inhaled. However, people working in the area must wear protective masks. Skin irritation may also be another area of concern for the reason that sizing materials used to coat the fibers contain chemicals that will cause severe skin reactions. Always wear protective clothing or use barrier skin creams in locations where carbon dust is present. In addition, carbon fibers are fantastic conductors of electricity. The carbon dust might cause shorts and arcing in electrical equipment. Generally electrical equipments that can't be moved from the area where carbon dust exists, the equipment is kept and sealed in cabinets or any other types of enclosure.

These components is often employed in high-quality planes, boats, cars, Formula 1 race cars and bicycles. It is also incorporated in marine decorations, general aviation interiors, instruments and general entertainment. As we know, that most cars, airplanes, boats are constructed of steel. By replacing these steel components with carbon fibre would basically slow up the weight by 60 % say example, for cars. That drop in weight would reduce the car's fuel consumption by 30 percent. With a lighter carbon fibre body, car manufacturers could build cars with smaller and efficient engines. Shedding weight, increasing fuel efficiency and develop other different kinds of engines.

Let's take a peek at some composites which makes carbon fiber stand out. Its high tensile strength. Low thermal expansion which means that they will expand a smaller amount in hot or cold conditions than materials like aluminum and steel. Exceptional durability, Corrosion-resistant, Radiolucence, meaning, carbon fibre is invisible in x-rays and transparent to radiation, which makes it valuable for usage in medical facilities. Electrical conductivity and it is also UV resistant given with use of proper resins.

The downside about these fibers, is the place they are compressed, confronted with high impact and pushed beyond its capabilities they're going to break. It will crack if hit by way of a hammer. The relative cost of these materials is high. Although some prices may have dropped in the past years, demand has not increased enough to create more supplies. So expect that sooner, prices for carbon fiber will likely remain the same.

Address: 4th floor,B building,Lihao industrial Park,Longgang district,Shenzhen,China
Phone: +86-755-84820454
Mobile: +86 13510750846
E-mail: info@acencarbonfiber.com
Fax: +86-755-84820456


Posted Jan 19, 2016 at 10:34am